Enter from a piece of metal material with precision, transmission and escapement

And all the workshops for the pilot production of plywood

After turning and milling, blanking, punching, fine finishing, gear hobbing

Heat treatment and other processes are carried out under the handover and testing of various equipment

It takes 10 to 12 months to produce

It has gone through 12,000 procedures

Produce 200 to 300 parts

Combine into 80 to 100 sets of components

It is then assembled into a movement in the assembly workshop as a set

Through the final debugging, proofreading, simulation and timekeeping

Wait for the inspection process

Produce qualified movements

And before this new movement is approved for production

The design and R&D department responds to the customized demands of customers.

I have been working on the drawing of 3D model drawings for more than two years

And it went through several months of trial production and structural improvement

And all these ten thousand procedures were meticulously crafted by Jing and his employees, 

who sat diligently at every table, holding tweezers and looking at the microscope minute by minute, bit by bit.

Ultimately, the JH7156 movement was assembled through the efforts of a thousand people and tens of thousands of procedures.

The movement of the Zenith "Dragon Soaring Pearl" mechanical watch below is made by your hands. We look forward to more of your exquisite works.